Instellen weegschaal:
Make sure that power is OFF. While pressing the ZEROkey, pressthepower switch.
The display shows“U SEt”. You can select each menu by pressing the ZEROkey and change the setting by pressing the TARE key. If you press ZEROkey, you can save current setting and go next mode.
PDN kan op twee manieren gebruikt worden:
Type 1: Enkel activeren op opdracht
Weegschaal: USB en rECR moet staan op 04
Integratie: CAS PDN Scale onder: Lokale instellingen > Apparaten
| Buad rate | 9600 |
|---|---|
| Data bit | 7 |
| Stop bit | 1 |
| Parity | Even |
| Match pattern | ([0-9]+[\.\,]+[0-9]+) |
| Find | |
| Replace | |
| String format | 0,### |
| Port | COMX |
Type 2: Continu aanlevering
Weegschaal: rECR moet staan op dEp “F-snd”
Integratie: CAS ER Scale onder: Lokale instellingen > Apparaten